dmesg - 1024k Strip
ACPI: EINJ 0x000000009D23C050 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x000000009D23C180 000210 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x000000009D23C390 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x000000009D23C438 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea001d5fffff] PMD -> [ffff88083f600000-ffff88085b7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x85fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0x9c94cfff]
node 0: [mem 0x9d349000-0x9d349fff]
node 0: [mem 0x9d3d0000-0x9d7fffff]
node 0: [mem 0x100000000-0x85fffffff]
On node 0 totalpages: 8375581
DMA zone: 56 pages used for memmap
DMA zone: 55 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 8728 pages used for memmap
DMA32 zone: 638334 pages, LIFO batch:31
Normal zone: 105728 pages used for memmap
Normal zone: 7733248 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
e820: [mem 0x9d800000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88085fc00000 s79296 r8192 d23104 u262144
pcpu-alloc: s79296 r8192 d23104 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8261014
Kernel command line: BOOT_IMAGE=/isolinux/gentoo root=/dev/ram0 init=/linuxrc aufs looptype=squashfs loop=/image.squashfs cdroot slowusb docache vconsole.keymap=us locale=en_US console=tty1 --
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32711392K/33502324K available (5835K kernel code, 473K rwdata, 2328K rodata, 908K init, 528K bss, 790932K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:4352 nr_irqs:1152 16
Console: colour dummy device 80x25
console [tty1] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3599.750 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.50 BogoMIPS (lpj=3599750)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140214
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff98b5b000 - ffffffff98b62000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57596.00 BogoMIPS)
devtmpfs: initialized
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 e
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xac000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xf9109000-0xf9109fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf9108000-0xf910800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf9107000-0xf91073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf9100000-0xf9103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf9106000-0xf91063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf9105000-0xf91057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf9104000-0xf91040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1000:005b] type 00 class 0x010400
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x14: [mem 0xfb960000-0xfb963fff 64bit]
pci 0000:01:00.0: reg 0x1c: [mem 0xfb900000-0xfb93ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xfb940000-0xfb95ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:02:00.0: [10de:1180] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xc7ffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:02:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:03:00.0: [10de:1180] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xb0000000-0xb7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xb8000000-0xb9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xc000-0xc07f]
pci 0000:03:00.0: reg 0x30: [mem 0xf9000000-0xf907ffff pref]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xf9080000-0xf9083fff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xb9ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb800000-0xfb80ffff 64bit]
pci 0000:06:00.0: reg 0x18: [mem 0xfb810000-0xfb811fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:07:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfb700000-0xfb70ffff 64bit]
pci 0000:07:00.0: reg 0x18: [mem 0xfb710000-0xfb711fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:08:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xca110000-0xca11ffff 64bit pref]
pci 0000:08:00.0: reg 0x18: [mem 0xca100000-0xca10ffff 64bit pref]
pci 0000:08:00.0: reg 0x30: [mem 0xfb600000-0xfb6007ff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.3: bridge window [mem 0xca100000-0xca1fffff 64bit pref]
pci 0000:09:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0xb040-0xb047]
pci 0000:09:00.0: reg 0x14: [io 0xb030-0xb033]
pci 0000:09:00.0: reg 0x18: [io 0xb020-0xb027]
pci 0000:09:00.0: reg 0x1c: [io 0xb010-0xb013]
pci 0000:09:00.0: reg 0x20: [io 0xb000-0xb00f]
pci 0000:09:00.0: reg 0x24: [mem 0xfb510000-0xfb5101ff]
pci 0000:09:00.0: reg 0x30: [mem 0xfb500000-0xfb50ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:0a:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0a:00.0: reg 0x10: [mem 0xfb400000-0xfb4007ff 64bit]
pci 0000:0a:00.0: reg 0x18: [io 0xa000-0xa0ff]
pci 0000:0a:00.0: supports D2
pci 0000:0a:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0b:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x10: [io 0x9040-0x9047]
pci 0000:0b:00.0: reg 0x14: [io 0x9030-0x9033]
pci 0000:0b:00.0: reg 0x18: [io 0x9020-0x9027]
pci 0000:0b:00.0: reg 0x1c: [io 0x9010-0x9013]
pci 0000:0b:00.0: reg 0x20: [io 0x9000-0x900f]
pci 0000:0b:00.0: reg 0x24: [mem 0xfb310000-0xfb3101ff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfb300000-0xfb30ffff pref]
pci 0000:0b:00.0: PME# supported from D3hot
pci 0000:00:1c.6: PCI bridge to [bus 0b]
pci 0000:00:1c.6: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.6: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0c:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0c:00.0: reg 0x10: [io 0x8040-0x8047]
pci 0000:0c:00.0: reg 0x14: [io 0x8030-0x8033]
pci 0000:0c:00.0: reg 0x18: [io 0x8020-0x8027]
pci 0000:0c:00.0: reg 0x1c: [io 0x8010-0x8013]
pci 0000:0c:00.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:0c:00.0: reg 0x24: [mem 0xfb210000-0xfb2101ff]
pci 0000:0c:00.0: reg 0x30: [mem 0xfb200000-0xfb20ffff pref]
pci 0000:0c:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 0c]
pci 0000:00:1c.7: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.7: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xac000000-0xfbffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x9c94d000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d34a000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d800000-0x9fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [io 0x0400-0x0453] could not be reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xb9ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.3: bridge window [mem 0xca100000-0xca1fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0b]
pci 0000:00:1c.6: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.6: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0c]
pci 0000:00:1c.7: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.7: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xac000000-0xfbffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf90fffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb9ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:07: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:08: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:08: resource 2 [mem 0xca100000-0xca1fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:09: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:0a: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0a: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0b: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:0b: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:0c: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0d: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0d: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0d: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0d: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0d: resource 10 [mem 0xac000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6856K (ffff88003728c000 - ffff88003793e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8bdbf000-0x8fdbf000] (64MB) mapped at [ffff88008bdbf000-ffff88008fdbefff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1424792905.864:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
aufs 3.15-20140714
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
ioapic: probe of 0000:00:05.4 failed with error -22
Linux agpgart interface v0.103
efifb: probing for efifb
efifb: framebuffer at 0xc9000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
xenfs: not registering filesystem on non-xen platform
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
drm/i810 does not support SMP
brd: module loaded
loop: module loaded
I2O subsystem v1.325
i2o: max drivers = 8
usbcore: registered new interface driver hwa-rc
usbcore: registered new interface driver i1480-dfu-usb
usbcore: registered new interface driver wusb-cbaf
usbcore: registered new interface driver cdc_wdm
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
TCP: cubic registered
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2015-02-24 15:48:26 UTC (1424792906)
Freeing unused kernel memory: 908K (ffffffff98a78000 - ffffffff98b5b000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 296K (ffff8800185b6000 - ffff880018600000)
Freeing unused kernel memory: 1768K (ffff880018846000 - ffff880018a00000)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: irq 64 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9105000 port 0xf9105100 irq 64
ata2: SATA max UDMA/133 abar m2048@0xf9105000 port 0xf9105180 irq 64
ata3: SATA max UDMA/133 abar m2048@0xf9105000 port 0xf9105200 irq 64
ata4: SATA max UDMA/133 abar m2048@0xf9105000 port 0xf9105280 irq 64
ata5: SATA max UDMA/133 abar m2048@0xf9105000 port 0xf9105300 irq 64
ata6: SATA max UDMA/133 abar m2048@0xf9105000 port 0xf9105380 irq 64
ahci 0000:09:00.0: irq 65 for MSI/MSI-X
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfb510000 port 0xfb510100 irq 65
ata8: SATA max UDMA/133 abar m512@0xfb510000 port 0xfb510180 irq 65
ahci 0000:0b:00.0: irq 66 for MSI/MSI-X
ahci 0000:0b:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310100 irq 66
ata10: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310180 irq 66
ahci 0000:0c:00.0: irq 67 for MSI/MSI-X
ahci 0000:0c:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi10 : ahci
scsi11 : ahci
ata11: SATA max UDMA/133 abar m512@0xfb210000 port 0xfb210100 irq 67
ata12: SATA max UDMA/133 abar m512@0xfb210000 port 0xfb210180 irq 67
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata6.00: ATA-8: WDC WD1002FAEX-007BA0, 05.01D05, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata2.00: ATA-8: MKNSSDCR60GB, 507ABBF0, max UDMA/133
ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: MKNSSDCR60GB, 507ABBF0, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA MKNSSDCR60GB 507A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA MKNSSDCR60GB 507A PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sdb: sdb1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
ata5.00: native sectors (586072368) is smaller than sectors (625142448)
ata5.00: ATA-7: ST3320620AS, 3.ADG, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AD PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
scsi 5:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata12.00: ATA-9: ST4000DM000-1F2168, CC54, max UDMA/133
ata12.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: ATAPI: HL-DT-ST BD-RE WH12LS39, 1.00, max UDMA/133
ata12.00: configured for UDMA/133
ata8.00: configured for UDMA/133
scsi 7:0:0:0: CD-ROM HL-DT-ST BD-RE WH12LS39 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
scsi 11:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC54 PQ: 0 ANSI: 5
sd 11:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 11:0:0:0: [sde] 4096-byte physical blocks
sd 11:0:0:0: [sde] Write Protect is off
sd 11:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 3599.939 MHz
sde: sde1 sde2
sd 11:0:0:0: [sde] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
sr 7:0:0:0: Attached scsi generic sg4 type 5
sd 11:0:0:0: Attached scsi generic sg5 type 0
scsi: Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.2-0[30300]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014
megasas: 0x1000:0x005b:0x1000:0x9275: bus 1:slot 0:func 0
megasas: FW now in Ready state
megaraid_sas 0000:01:00.0: irq 68 for MSI/MSI-X
megaraid_sas 0000:01:00.0: irq 69 for MSI/MSI-X
megaraid_sas 0000:01:00.0: irq 70 for MSI/MSI-X
megaraid_sas 0000:01:00.0: irq 71 for MSI/MSI-X
megaraid_sas 0000:01:00.0: irq 72 for MSI/MSI-X
megaraid_sas 0000:01:00.0: irq 73 for MSI/MSI-X
megaraid_sas 0000:01:00.0: irq 74 for MSI/MSI-X
megaraid_sas 0000:01:00.0: irq 75 for MSI/MSI-X
megaraid_sas 0000:01:00.0: [scsi12]: FW supports MSIX vector,Online CPUs: ,Current MSIX
megasas:IOC Init cmd success
megasas: INIT adapter done
megaraid_sas 0000:01:00.0: Controller type: MR,Memory size is: 1024MB
scsi12 : LSI SAS based MegaRAID driver
scsi 12:0:0:0: Direct-Access LSI MR9271-8iCC 3.44 PQ: 0 ANSI: 5
scsi 12:2:0:0: Direct-Access LSI MR9271-8iCC 3.44 PQ: 0 ANSI: 5
sd 12:2:0:0: [sdf] 3898605568 512-byte logical blocks: (1.99 TB/1.81 TiB)
sd 12:2:0:0: Attached scsi generic sg6 type 0
sd 12:2:0:0: [sdf] 4096-byte physical blocks
sd 12:2:0:0: [sdf] Write Protect is off
sd 12:2:0:0: [sdf] Mode Sense: 1f 00 10 08
sd 12:2:0:0: [sdf] Write cache: disabled, read cache: disabled, supports DPO and FUA
sdf: unknown partition table
sd 12:2:0:0: [sdf] Attached SCSI disk
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.45
Copyright(c) 2004-2013 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
mpt2sas version 16.100.00.00 loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf9107000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf9106000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 83 for MSI/MSI-X
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 89 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 90 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 91 for MSI/MSI-X
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
raid6: sse2x1 9507 MB/s
raid6: sse2x2 12074 MB/s
raid6: sse2x4 14019 MB/s
raid6: using algorithm sse2x4 (14019 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 27996.000 MB/sec
md: raid10 personality registered for level 10
md: raid1 personality registered for level 1
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: raid: Loading target version 1.5.2
md: raid0 personality registered for level 0
md: linear personality registered for level -1
md: multipath personality registered for level -4
Btrfs loaded, assert=on
BTRFS: selftest: Running btrfs free space cache tests
BTRFS: selftest: Running extent only tests
BTRFS: selftest: Running bitmap only tests
BTRFS: selftest: Running bitmap and extent tests
BTRFS: selftest: Free space cache tests finished
BTRFS: selftest: Running extent buffer operation tests
BTRFS: selftest: Running btrfs_split_item tests
BTRFS: selftest: Running find delalloc tests
BTRFS: selftest: Running btrfs_get_extent tests
BTRFS: selftest: Running hole first btrfs_get_extent test
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SPL: Loaded module v0.6.3-r0-gentoo
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.6.3-r0-gentoo, ZFS pool version 5000, ZFS filesystem version 5
fuse init (API version 7.23)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
sky2: driver version 1.30
tg3.c:v3.136 (Jan 03, 2014)
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:20:44:0c
tg3 0000:08:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI
Loading iSCSI transport class v2.0-870.
usb 1-1: new high-speed USB device number 2 using ehci-pci
iscsi: registered transport (tcp)
AVX version of gcm_enc/dec engaged.
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x4
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 04 00 00 01 00
end_request: I/O error, dev sr0, sector 16
REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 4, size 2048)
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x20
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 20 00 00 01 00
end_request: I/O error, dev sr0, sector 128
REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 32, size 2048)
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
EXT4-fs (sr0): unable to read superblock
usb 2-1: new high-speed USB device number 2 using ehci-pci
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
EXT4-fs (sr0): unable to read superblock
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
EXT4-fs (sr0): unable to read superblock
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
end_request: I/O error, dev sr0, sector 0
SQUASHFS error: squashfs_read_data failed to read block 0x0
SQUASHFS error: unable to read squashfs_super_block
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Switched to clocksource tsc
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
FAT-fs (sr0): unable to read boot sector
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x10
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 10 00 00 01 00
end_request: I/O error, dev sr0, sector 64
isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x10
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
end_request: I/O error, dev sr0, sector 64
usb 5-2: new high-speed USB device number 2 using xhci_hcd
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x1e
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 1e 00 00 02 00
end_request: I/O error, dev sr0, sector 120
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x20
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 20 00 00 01 00
Buffer I/O error on device sr0, logical block 32
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x21
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 21 00 00 01 00
Buffer I/O error on device sr0, logical block 33
usb-storage 5-2:1.0: USB Mass Storage device detected
scsi13 : usb-storage 5-2:1.0
EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sdb1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.3: new full-speed USB device number 3 using ehci-pci
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1B1C:1B09.0001/input/input5
hid-generic 0003:1B1C:1B09.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input0
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:1B1C:1B09.0002/input/input6
hid-generic 0003:1B1C:1B09.0002: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input1
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:1B1C:1B09.0003/input/input7
hid-generic 0003:1B1C:1B09.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input2
EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sdb1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.5: new full-speed USB device number 4 using ehci-pci
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x4
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 04 00 00 01 00
REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 4, size 2048)
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x20
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 20 00 00 01 00
REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 32, size 2048)
hid-generic 0003:0764:0501.0004: hiddev0,hidraw3: USB HID v1.10 Device [CP1500PFCLCD CRCA102*AF1] on usb-0000:00:1d.0-1.5/input0
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
EXT4-fs (sr0): unable to read superblock
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
EXT4-fs (sr0): unable to read superblock
usb 2-1.6: new full-speed USB device number 5 using ehci-pci
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
EXT4-fs (sr0): unable to read superblock
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
SQUASHFS error: squashfs_read_data failed to read block 0x0
SQUASHFS error: unable to read squashfs_super_block
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C068.0005/input/input8
hid-generic 0003:046D:C068.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C068.0006/input/input9
hid-generic 0003:046D:C068.0006: input,hiddev0,hidraw5: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
FAT-fs (sr0): unable to read boot sector
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x10
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 10 00 00 01 00
isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x10
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x1e
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 1e 00 00 02 00
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x20
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 20 00 00 01 00
Buffer I/O error on device sr0, logical block 32
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x21
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 21 00 00 01 00
Buffer I/O error on device sr0, logical block 33
scsi 13:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg7 type 0
sd 13:0:0:0: [sdg] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 13:0:0:0: [sdg] Write Protect is off
sd 13:0:0:0: [sdg] Mode Sense: 23 00 00 00
sd 13:0:0:0: [sdg] No Caching mode page found
sd 13:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1
sd 13:0:0:0: [sdg] Attached SCSI removable disk
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x4
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 04 00 00 01 00
blk_update_request: 16 callbacks suppressed
end_request: I/O error, dev sr0, sector 16
REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 4, size 2048)
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x20
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 20 00 00 01 00
end_request: I/O error, dev sr0, sector 128
REISERFS warning (device sr0): sh-2006 read_super_block: bread failed (dev sr0, block 32, size 2048)
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
EXT4-fs (sr0): unable to read superblock
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
EXT4-fs (sr0): unable to read superblock
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
EXT4-fs (sr0): unable to read superblock
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
end_request: I/O error, dev sr0, sector 0
SQUASHFS error: squashfs_read_data failed to read block 0x0
SQUASHFS error: unable to read squashfs_super_block
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
FAT-fs (sr0): unable to read boot sector
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x10
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 10 00 00 01 00
end_request: I/O error, dev sr0, sector 64
isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x10
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
end_request: I/O error, dev sr0, sector 64
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x1e
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 1e 00 00 02 00
end_request: I/O error, dev sr0, sector 120
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x0
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x20
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 20 00 00 01 00
Buffer I/O error on device sr0, logical block 32
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x21
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 00 00 21 00 00 01 00
Buffer I/O error on device sr0, logical block 33
EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sdb1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
aufs test_add:293:mount[3282]: uid/gid/perm /mnt/livecd 0/0/0755, 0/0/01777
systemd-udevd[3887]: starting version 215
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 92 for MSI/MSI-X
snd_hda_intel 0000:02:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
wmi: Mapper loaded
firewire_ohci 0000:0a:00.0: enabling device (0000 -> 0003)
input: PC Speaker as /devices/platform/pcspkr/input/input10
sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
EDAC MC: Ver: 3.0.0
systemd-udevd[3905]: renamed network interface eth0 to enp8s0
MXM: GUID detected in BIOS
checking generic (c9000000 300000) vs hw (c0000000 8000000)
checking generic (c9000000 300000) vs hw (c8000000 2000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0e4000a2
nouveau [ DEVICE][0000:02:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:02:00.0] Family : NVE0
nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:02:00.0] ... signature not found
nouveau [ VBIOS][0000:02:00.0] checking PROM for image...
firewire_ohci 0000:0a:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
nouveau [ VBIOS][0000:02:00.0] using image from PROM
nouveau [ VBIOS][0000:02:00.0] BIT signature found
nouveau [ VBIOS][0000:02:00.0] version 80.04.47.00.03
nouveau 0000:02:00.0: irq 93 for MSI/MSI-X
nouveau [ PMC][0000:02:00.0] MSI interrupts enabled
nouveau [ PFB][0000:02:00.0] RAM type: GDDR5
nouveau [ PFB][0000:02:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:02:00.0] GPU voltage: 987500uv
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
nouveau [ PTHERM][0000:02:00.0] FAN control: PWM
nouveau [ PTHERM][0000:02:00.0] fan management: automatic
nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
nouveau [ CLK][0000:02:00.0] 07: core 324 MHz memory 648 MHz
nouveau [ CLK][0000:02:00.0] 0a: core 324-862 MHz memory 1620 MHz
nouveau [ CLK][0000:02:00.0] 0d: core 540-1202 MHz memory 6008 MHz
nouveau [ CLK][0000:02:00.0] 0f: core 540-1202 MHz memory 6008 MHz
nouveau [ CLK][0000:02:00.0] --: core 324 MHz memory 648 MHz
systemd-sysctl[3951]: Overwriting earlier assignment of kernel/sysrq in file '/usr/lib64/sysctl.d/60-gentoo.conf'.
[TTM] Zone kernel: Available graphics memory: 16457962 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02000f00 00000000
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 02022f62 00020010
nouveau [ DRM] DCB outp 04: 04833fb6 0f420010
nouveau [ DRM] DCB outp 05: 04033f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00020131
nouveau [ DRM] DCB conn 02: 00010261
nouveau [ DRM] DCB conn 03: 00002346
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1920x1080 fb: 0x80000, bo ffff880839bfd800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:02:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0
nouveau 0000:03:00.0: enabling device (0004 -> 0007)
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0e4000a2
nouveau [ DEVICE][0000:03:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:03:00.0] Family : NVE0
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:03:00.0] ... signature not found
nouveau [ VBIOS][0000:03:00.0] checking PROM for image...
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 80.04.28.00.28
nouveau [ DEVINIT][0000:03:00.0] adaptor not initialised
nouveau [ VBIOS][0000:03:00.0] running init tables
firewire_core 0000:0a:00.0: created device fw0: GUID 008f1300a8461100, S400
nouveau 0000:03:00.0: irq 94 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:03:00.0] GPU voltage: 987500uv
nouveau [ PTHERM][0000:03:00.0] FAN control: PWM
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 07: core 324 MHz memory 648 MHz
nouveau [ CLK][0000:03:00.0] 0a: core 324-862 MHz memory 1620 MHz
nouveau [ CLK][0000:03:00.0] 0d: core 540-1280 MHz memory 6208 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 540-1280 MHz memory 6208 MHz
nouveau [ CLK][0000:03:00.0] --: core 324 MHz memory 648 MHz
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02000f00 00000000
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 02022f62 00020010
nouveau [ DRM] DCB outp 04: 04833fb6 0f420010
nouveau [ DRM] DCB outp 05: 04033f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00020131
nouveau [ DRM] DCB conn 02: 00010261
nouveau [ DRM] DCB conn 03: 00002346
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1920x1080 fb: 0x80000, bo ffff88083910c400
nouveau 0000:03:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 1
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x119340
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 11 93 40 00 00 02 00
blk_update_request: 3 callbacks suppressed
end_request: I/O error, dev sr0, sector 4607232
sr 7:0:0:0: [sr0]
Result: hostbyte=0x00 driverbyte=0x08
sr 7:0:0:0: [sr0]
Sense Key : 0x5 [current]
Info fld=0x119364
sr 7:0:0:0: [sr0]
ASC=0x21 ASCQ=0x0
sr 7:0:0:0: [sr0] CDB:
cdb[0]=0x28: 28 00 00 11 93 64 00 00 02 00
end_request: I/O error, dev sr0, sector 4607376
warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
NET: Registered protocol family 10
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
tg3 0000:08:00.0: irq 95 for MSI/MSI-X
tg3 0000:08:00.0: irq 96 for MSI/MSI-X
tg3 0000:08:00.0: irq 97 for MSI/MSI-X
tg3 0000:08:00.0: irq 98 for MSI/MSI-X
tg3 0000:08:00.0: irq 99 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
tg3 0000:08:00.0 enp8s0: Link is up at 1000 Mbps, full duplex
tg3 0000:08:00.0 enp8s0: Flow control is on for TX and on for RX
tg3 0000:08:00.0 enp8s0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
usb 2-1.6: USB disconnect, device number 5
usb 2-1.6: new full-speed USB device number 6 using ehci-pci
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C068.0007/input/input11
hid-generic 0003:046D:C068.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C068.0008/input/input12
input: failed to attach handler kbd to device input12, error: -16
sysrq: Failed to open input device, error -16
input: failed to attach handler sysrq to device input12, error: -16
hid-generic 0003:046D:C068.0008: input,hiddev0,hidraw5: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
porthole[7565]: segfault at 18 ip 00007f4e6523ecdd sp 00007fff6d2df420 error 4 in libgdk-x11-2.0.so.0.2400.24[7f4e651e0000+ae000]
porthole[7581]: segfault at 18 ip 00007f64eea37cdd sp 00007fffb2922a60 error 4 in libgdk-x11-2.0.so.0.2400.24[7f64ee9d9000+ae000]
conftest[689]: segfault at 0 ip 0000000000400590 sp 00007fffbf050f60 error 4 in conftest[400000+1000]
conftest[713]: segfault at 0 ip 00007f8a4bb431fa sp 00007fff456fd6b8 error 4 in libc-2.19.so[7f8a4bab2000+19a000]
upower[31017]: segfault at 25 ip 00007f3b3a26d80d sp 00007fff5e7ebff0 error 4 in libglib-2.0.so.0.4000.0[7f3b3a1ec000+131000]
sdf: unknown partition table
sdf: unknown partition table
sdf: unknown partition table
chrome[19250]: segfault at 0 ip 00007fe314fb99ec sp 00007fff3064ac00 error 4 in chrome[7fe312ba2000+5c0e000]
sdf: unknown partition table
sdf: sdf1
sdf: sdf1
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
upower[7975]: segfault at 25 ip 00007fcde8a9380d sp 00007fff27a29440 error 4 in libglib-2.0.so.0.4000.0[7fcde8a12000+131000]
usb 2-1.5: USB disconnect, device number 4
usb 2-1.5: new full-speed USB device number 7 using ehci-pci
hid-generic 0003:0764:0501.0009: hiddev0,hidraw3: USB HID v1.10 Device [CP1500PFCLCD CRCA102*AF1] on usb-0000:00:1d.0-1.5/input0
bash (7448): drop_caches: 3
bash (7448): drop_caches: 4
usb 2-1.3: USB disconnect, device number 3
usb 2-1.3: new full-speed USB device number 8 using ehci-pci
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1B1C:1B09.000A/input/input13
hid-generic 0003:1B1C:1B09.000A: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input0
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:1B1C:1B09.000B/input/input14
hid-generic 0003:1B1C:1B09.000B: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input1
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:1B1C:1B09.000C/input/input15
hid-generic 0003:1B1C:1B09.000C: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input2
usb 2-1.3: USB disconnect, device number 8
usb 2-1.3: new full-speed USB device number 9 using ehci-pci
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1B1C:1B09.000D/input/input16
hid-generic 0003:1B1C:1B09.000D: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input0
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:1B1C:1B09.000E/input/input17
hid-generic 0003:1B1C:1B09.000E: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input1
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:1B1C:1B09.000F/input/input18
hid-generic 0003:1B1C:1B09.000F: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input2
usb 2-1.3: USB disconnect, device number 9
usb 2-1.3: new full-speed USB device number 10 using ehci-pci
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1B1C:1B09.0010/input/input19
hid-generic 0003:1B1C:1B09.0010: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input0
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:1B1C:1B09.0011/input/input20
input: failed to attach handler kbd to device input20, error: -16
hid-generic 0003:1B1C:1B09.0011: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input1
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:1B1C:1B09.0012/input/input21
input: failed to attach handler kbd to device input21, error: -16
sysrq: Failed to open input device, error -16
input: failed to attach handler sysrq to device input21, error: -16
hid-generic 0003:1B1C:1B09.0012: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input2
usb 2-1.3: USB disconnect, device number 10
usb 2-1.3: new full-speed USB device number 11 using ehci-pci
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1B1C:1B09.0013/input/input22
hid-generic 0003:1B1C:1B09.0013: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input0
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:1B1C:1B09.0014/input/input23
hid-generic 0003:1B1C:1B09.0014: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input1
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:1B1C:1B09.0015/input/input24
hid-generic 0003:1B1C:1B09.0015: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:1d.0-1.3/input2
upower[19417]: segfault at 25 ip 00007f9ba4bcf80d sp 00007fff09698840 error 4 in libglib-2.0.so.0.4000.0[7f9ba4b4e000+131000]
scsi 12:2:0:0: Direct-Access LSI MR9271-8iCC 3.44 PQ: 0 ANSI: 5
sd 12:2:0:0: Attached scsi generic sg6 type 0
sd 12:2:0:0: [sdf] 1949302784 512-byte logical blocks: (998 GB/929 GiB)
sd 12:2:0:0: [sdf] Write Protect is off
sd 12:2:0:0: [sdf] Mode Sense: 1f 00 00 08
sd 12:2:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: unknown partition table
sd 12:2:0:0: [sdf] Attached SCSI disk
sd 12:2:0:0: [sdf] Synchronizing SCSI cache
scsi 12:2:0:0: Direct-Access LSI MR9271-8iCC 3.44 PQ: 0 ANSI: 5
sd 12:2:0:0: Attached scsi generic sg6 type 0
sd 12:2:0:0: [sdf] 1949302784 512-byte logical blocks: (998 GB/929 GiB)
sd 12:2:0:0: [sdf] Write Protect is off
sd 12:2:0:0: [sdf] Mode Sense: 1f 00 00 08
sd 12:2:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: unknown partition table
sd 12:2:0:0: [sdf] Attached SCSI disk
sd 12:2:0:0: [sdf] Synchronizing SCSI cache
scsi 12:2:0:0: Direct-Access LSI MR9271-8iCC 3.44 PQ: 0 ANSI: 5
sd 12:2:0:0: [sdf] 3898605568 512-byte logical blocks: (1.99 TB/1.81 TiB)
sd 12:2:0:0: Attached scsi generic sg6 type 0
sd 12:2:0:0: [sdf] Write Protect is off
sd 12:2:0:0: [sdf] Mode Sense: 1f 00 10 08
sd 12:2:0:0: [sdf] Write cache: disabled, read cache: disabled, supports DPO and FUA
sdf: unknown partition table
sd 12:2:0:0: [sdf] Attached SCSI disk
sdf: unknown partition table
sdf: sdf1
sdf: sdf1
upower[28373]: segfault at 25 ip 00007fe4e19e580d sp 00007fff97af7cb0 error 4 in libglib-2.0.so.0.4000.0[7fe4e1964000+131000]
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
upower[2858]: segfault at 25 ip 00007f0b24c2280d sp 00007fff9e6eb8f0 error 4 in libglib-2.0.so.0.4000.0[7f0b24ba1000+131000]